47 PU update...

Unknown
Unknown
edited November -1 in HUDSON
Did I read a post here a while back about somebody making rear frams rail sections? Do they work on the PU? Mine is gone from the back of the cab to the tailgate. This might be hotrod material if it needs a back half.

Comments

  • Uncle Josh
    Uncle Josh Senior Contributor
    If your pickup is that bad, get a frame from a car and add 7 inches to it.
  • Unknown
    Unknown
    That was it! Okay, where d I add 7"?
  • nick s
    nick s Senior Contributor
    Uncle Josh wrote:
    If your pickup is that bad, get a frame from a car and add 7 inches to it.
    or subtract 7 from the bed
  • bellbigdawg
    bellbigdawg Expert Adviser
    the extra length is (of course) in the front part of the bed. it was 5 inches, the rest of the frame to frame length difference is in front of the door in the lower cowl/firewall area.
  • [Deleted User]
    [Deleted User]
    The shop manual shows the photos of the frame and gives measurements to show the differences between the 121" & 128" wheelbase frames.



    Tom Drew
  • LanceB
    LanceB Senior Contributor
    And doesn't the 128" WB have an additional set of running board supports?
This discussion has been closed.

Categories

In this Discussion